The XA500 is a wideband design requiring no tuning and offers very easy installation.
The output connector can be supplied as either 7/16 DIN (f) or 7/8” EIA flange.
The XA500 front panel LCD display shows forward and reflected power together with internal voltages, and temperatures.
Quick view LED’s show advanced status information including CPU ok, system normal and external mute.
Versions of the XA500 are available with 1 or 2 hot pluggable, front panel mounted, high specification switching type power supplies. These are telecom standard units with a proven track record of high reliability in harsh and hostile environments. The two PSU version provides
100% power supply redundancy.
The rear panel includes a remote control/monitoring socket that allows carrier muting and status signalling to an external system. Optional TCP/IP or RS232 interfaces are available.
The XA500 uses EBL’s world renowned heat dissipating “fresh-air-tunnel” concept with dual fans. The fans provide cooling to the specially designed heat sink with a stream of air that needs no filtering saving on routine filter replacements. Minimal active components are in the air flow thus keeping sensitive areas free from dust and contaminants. For the harshest of environments that demand additional air filtering, clip on filter kits are available that attach to the exterior of the PSU and RF sections of the XA500.
|Frequency range||87.5 to 108MHz|
|RF Interfaces||50Ω nominal. Input N type (f), Output 7/8” EIA or 7/16 DIN (f), Monitor BNC socket.|
|Power output||125W to 500W (adjustable)|
|Input drive level||RF Input from Exciter/Drive supplied:- 15 -20W (25W absolute maximum)|
|Output Power Variation||Not more than ±0.5dB under all specified operating conditions|
|Spurious emissions||< -76dBc (9kHz to 1GHz)|
|Power supply (AC)||110 – 260v, 47 – 63Hz|
|Temperature (operating)||0 to 45ºC|
|Humidity (operating)||< 95% RH, non condensing|
|Dimensions||3U with 570mm intrusion to rack (exc. RF output connector)|