The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output.
In addition to the Broadcaster’s native 20Hz-20kHz response a selectable high-pass filter at 75Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an innovative ‘On-Air’ indicator on the body that can be wired for external activation by the ‘Channel On/Mute’ function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
|Acoustic Principle||Pressure Gradient|
|Active Electronics||JFET impedance converter with bipolar output buffer|
|Frequency Range||20Hz – 20KHz|
|Maximium SPL||128dB SPL @ 1KHz, 1% THD into 1KΩ load|
|Maximium Output Level||2.0dBu @ 1KHz, 1% THD into 1KΩ load|
|Sensitivity||-34.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) ± 2 dB @ 1kHz|
|Equivalent Noise Level (A-weighted)||14dB-A|
|Dimensions||167.00mmH x 50.00mmW x 65.00mmD|
|Warranty||1 year with free extension to 10 years following registration|