UNIDEX UX24

The UNIDEX UX24 is a standalone digital, modular mixing console with In/Out connectors at the rear, allowing for use of existing studio wiring, but also has the added benefit of including DANTE AES67 IP connectivity.

The UX24-A67 is the perfect solution because it handles a third of its capacity by AoIP and keeps the rest for direct connections to the console. This allows you to directly connect the following:

• The outputs for headphones and studio monitors
• The 4 and 16-channel USB connections used by PCs
• Microphone inputs will be on the console
• The AES3/Spdif Inputs/Outputs of the control desk devices
• The inputs for the Studio microphones

By doing this the existing wiring in a studio IS PRESERVED without changes. Flexible cables attached to tiny RJ45 connectors disappear from view as they are covered by the console’s removable aluminum trim.

Technical Features:

24 Channels

• 12 Faders on the console panel that can be extended to 24 by adding UX-6 panels; 12 virtual faders operable from the built-in touch Screen or any PC connected to the LAN network or from outside the radio station.
• Preset SCENES: The distribution of the 24 channels and the type of inputs are programmed by the operator. It can have 12 different scenarios programmed to change the distribution and number of channels in each program of the radio/TV station
• Mini OLED display in each channel, channel name, stereo input Vumeter, fader level & info

32 Inputs

• 4 x MIC with phantom 48V // 4 x stereo LIN // 4 x AES3 stereo, 24 bits, all sampling rates using internal Sample Rate Converter // 4 x USB stereo digital
• 16 x Unidex supporting 8 stereo lines, 16 additional MICs or 8 Telco systems
• Audio Processing independent in each input

28 Outputs

• 2 x balanced stereo PGM // 4 x balanced stereo configurable // 8 x unbalanced configurable (mix minus)
• 4 x stereo AES3, 48 kHz, 24 bit // 4 x USB stereo // 2 x Dual Streaming AoIP stereo
• 2 x Control room, Stereo Speakers and Headphones // 2 x Announcer’s Studio, Stereo Speaker and Headphones + Talkback

GPIO, Intercom, Auxillary Devices

• GPIO= 2 x Tally Light (STUDIO A and B); 12 VDC, 250ma // 4 x GPIO inputs, user configurable ( active high 3.3~15v )
• 8 x GPIO Out user configurable (7 x open collector; + 24V @ 250 mA + 1 x 12V DC, 250ma )
• AUDIO =1 x Stereo Air Monitor receiver Input // 1x Talkback Input from Studio
• 1 Talkback Output to Studio // 4 x configurable Intercom channels; front panel keypad
• N x Intercom PPT (talk-listen) on all TELCO channels with CUE button to talk privately with phone lines, cell phones, Skype, etc.

USB IN/Out

• One USB 2.0 output supports 16 channels (4 play/rec virtual cards)
• ASIO 2.2 compliant driver with playback mix (simultaneous ASIO and WDM playback)
• It supports both 32-bit and 64-bit ASIO host applications. You can use VST plug-ins
• Multi-client support (multiple ASIO applications in parallel)
• Windows 10/8/7 (32 & 64 bits) // Volume and mute control through Windows standard GUI

Audio System Specification

• 24 Channels, 4x stereo bus mix + 1x PFL (CUE) bus 24bitSR@48khz
• Audio Processing in all user-selected channels; 3 & 4 bands Parametric EQ, Expander, Gate, Compressor, Limiter, DeEsser in MICs
• Auto Mix-minus outputs & Talkback/intercom routing
• DELAY:1.2 mS (Analog Line to Analog Out) // 1.4 mS (MIC In to Out using EQ + Level processor + De-Esser)

Dante AES67 Option

This option keeps the stand-alone configuration of the UX 24 with the exception of 4 stereo analog LIN inputs and 4 stereo Unidex inputs that are replaced by 16 AoIP inputs. The AoIP outputs are: stereo PGM, REC, AUX, Control Headphones, Studio headphones and 3 stereo channels user-routed. This Dante option manages 16 x 16 channels and is able to work in existing Dante networks up to 512 x 512 channels